- 🚚Shipped from a European warehouse
- 💶Final price — no customs or import fees within the EU
- ⚡Fast delivery: usually 2–5 business days (depending on the country)
- 🔎Tracking after dispatch
- ↩️14-day returns (EU law)
- 🛡️24-month seller liability
- 💬Support before and after purchase
- ✅ Verified offer — matches the description
- 🧾Clear description and photos
- 🧩Easy variant selection
- 📦Secure packaging
- ⭐Good “for now” choice
T3 turbocharger for Nissan Skyline engines
T3 exhaust flange turbocharger, designed for applications in Nissan Skyline R32, R33, and R34 with RB20DET and RB25DET 2.0-2.5L engines. The source describes it as a bolt-on turbocharger for these engines, however, modifications may be required for some R33 models. A connector may be needed to connect to the hotpipe.
This product is not a specific part for a specific vehicle model. Before purchasing, please compare the installation parameters and verify compatibility with your specific vehicle, exhaust system, intake system, oil system, and water system.
Technical specifications
- Type: turbocharger with wastegate
- Exhaust inlet flange: T3
- Exhaust outlet flange: 6-bolt
- Bearing: wet float
- Cooling: water and oil
- Turbine wheel inducer diameter: 64.4 mm
- Turbine exducer wheel diameter: 47.9 mm
- Turbine trim: 55.3
- A/R turbine: 0.63
- Compressor wheel inducer diameter: 52.7 mm
- Compressor exducer wheel diameter: 76 mm
- Compressor Trim: 48.1
- Compressor A/R: 0.5
- Oil inlet: M12 × 1.25
- Side holes: 2 × M8 × 1.25
- Oil outlet: 2 × M8 × 1.25
- Spacing of measures: 50.8 mm
- Water hole: M18 × 1.5
- Air intake: 3 inches
- Declared boost power: up to 500 BHP, according to source data
Design and dimensions
- Turbine housing: QT450-10 ductile iron, declared temperature resistance up to 700°C
- Turbine wheel: K418 alloy steel rotor, declared stability and oxidation resistance up to 900°C
- Compressor housing: ZL104 aluminum
- Compressor wheel: cast aluminum
- Overall dimensions: length 29 cm, width 27 cm, height 23 cm
- Mass: 8450 g
Application and important installation recommendations
This turbocharger is recommended for the Nissan Skyline R32, R33, and R34 with RB20DET and RB25DET engines. Some R33 versions may require modifications. Before installation, it's important to investigate the cause of the previous turbocharger failure and correct any potential issues, including oil supply problems, foreign bodies in the intake system, or faulty crankcase ventilation.
- The oil return line should be located lower than the turbocharger.
- In a petrol car, a water cooling system should be used.
- The exhaust outlet should be tightly connected in accordance with the installation requirements.
- Before starting, check the fit of the oil, water, intake and exhaust connections.
- Installation by a person experienced in installing turbochargers is recommended.
OEM/OE numbers
There is no confirmed OEM/OE number for this product.
Helpful information before purchasing
This T3 turbocharger is designed for use in Nissan Skyline R32, R33, and R34 models with RB20DET and RB25DET engines from 2.0-2.5 liters. This is not a vehicle-specific part. Some R33 models may require modifications, and an adapter may be required to connect to the hot pipe. Before purchasing, compare the flanges, oil and water connections, and other dimensions with your vehicle's system.
The most important information
- T3 exhaust inlet flange and 6-bolt exhaust outlet flange.
- Compatibility recommended for RB20DET and RB25DET engines in Nissan Skyline R32, R33 and R34.
- Water and oil cooling, wastegate and wet float bearings.
- Dimensions: 29 × 27 × 23 cm; weight: 8450 g.
- No confirmed OEM/OE number.
Contents of the set
The source states that you will receive the accessories shown in the photo. The exact scope of components is not specified, so please verify which cables, seals, and mounting hardware are included before purchasing.
Frequently asked questions
How do I check if a part fits?
Compare the application with your existing Nissan Skyline R32, R33, or R34 and RB20DET or RB25DET engine. Check the T3 flange, 6-bolt outlet, oil and water connections, dimensions, and hotpipe requirements. Modifications may be required for some R33 models.
Is the product ready for assembly?
The source describes the turbocharger as a bolt-on solution, but also notes the possibility of modification and the need for a hot pipe connector. The scope of work required depends on the specific vehicle and installation.
Does the offer include a complete set?
A detailed list of the set's components has not been confirmed. The source only indicates the accessories shown in the photo, so please verify the set's contents before ordering.
Why is it worth buying from Multigenus?
- Ships from European warehouse for selected offers
- Final price within the EU, excluding customs and import surcharges
- 14 days to return in accordance with EU law
- Pre- and post-purchase support
- The product is described in a way that makes it easier to choose the right variant