Application :
For VW
For VW Golf MK5 A5 Typ 1K 2003-2009
For VW Golf MK6 A6 Typ 5K 2008-2013
For VW Jetta MK5 A5 Typ 1K5 2006-2011
For VW Passat B6 2006-2010
For VW EOS 1F 2007-2014
For VW CC 2009-2014
For VW Tiguan 2009-2014
For VW Beetle 2012-2014
For Audi
For Audi A3 8P FWD 2003-2013
For Audi TT 8J FWD 2006-2014
Specification:
Quantity: 2x front and 2x rear/A pair wrench for height adjustment
Adjustable height: Front lowering 30-75mm (depends on the vehicle models)
Adjustable height: Rear lowering 30-65mm (depends on the vehicle models)
for 50mm & 55mm Strut
Spring Rate Front: 4 kg/mm (224 lbs/in)
Spring Rate Rear: 3.5 kg/mm (196 lbs/in)
Spring length Front: 245 mm
Spring length Rear: 239 mm
Shock type: Twin tube
Spring Preload: 7-10 mm
Top mounts: Front and rear OE top mounts required
Feature:
1. Lower height adjustable (depends on vehicle models)
2. Dust boot, solid rubber bump stops
3. Weight Saving Aluminum Components And heavy duty Steel Lower Mount Brackets
4. Simple installation, Easy to adjust.
5. Use the vehicle's original upper mounts (not included in our product kit).
Notice:
1. All modifications must be installed by licensed mechanics and in compliance with your local modification regulations.
2. Please ensure all components are tightened with correct torque specifications (which can be found in the vehicle service manual) before and after installation. Any loose nuts, bolts, or locks will cause noise. Do check and tighten before serious problems happen.
3. Impact wrench is prohibited during the installation, it will loosen or damage the product.
4. Examine the clearance between tires and suspension. (The minimum clearance should be 4mm, otherwise, you need to add wheel spacers. Caution: It is not sufficient with torsion beam trailing arm axles)
5. We suggest regular maintenance for the coil-over, spray with some WD40 every 3-4 months will keep it smooth and clean, which helps to extend the lifetime.