🔥 Bestseller this week
🔒
Risk-free purchase within the EU
- 🚚Shipped from a European warehouse
- 💶Final price — no customs or import fees within the EU
- ⚡Fast delivery: usually 2–5 business days (depending on the country)
- 🔎Tracking after dispatch
- ↩️14-day returns (EU law)
- 🛡️24-month seller liability
- 💬Support before and after purchase
⭐ Why choose this product
- ✅ Verified offer — matches the description
- 🧾Clear description and photos
- 🧩Easy variant selection
- 📦Secure packaging
- ⭐Good “for now” choice
SPECIFICATIONS
Brand Name: MXR
Highly-concerned chemical: None
Origin: Mainland China
Notice: No Top Mount Included
Application
for Audi TT Coupe 8N 1998-2006
for Audi TT Roadster 8N 1999-2006
for Seat Leon 1M1 1999-2006
Engine: 1.8/ 1.8T
(Note: Does not fit Quattro models; Does not fit Vehicles with auto/self leveling suspension)
Note: You will need shortened Sway Bar Link（ For Audi TT, you need shorter drop links）
Specification
Height adjustable: Yes, lowering 0-25mm depending on the vehicle models
Damping : fixed damping
Top mounts: Front and rear OE top mounts required
Spring rate Front: 6 kg/mm (336 lbs/in)
Spring rate Rear: 6 kg/mm (336 lbs/in)
Spring length Front: 140 mm
Spring length Rear: 275 mm
Spring Preload advised: 7-10 mm
Shock type: twin tube
Package included
2 x Front coil-overs
2 x Rear coil-overs
2 x C spanners
Feature
1. 0-25mm(depends on vehicle models) lower height adjustable
2. Dust boot, solid rubber bump stops
3. Weight Saving Aluminum Coamponents And heavy duty Steel Lower Mount Brackets
4. Simple installation, Easy to adjust.
5. Use the vehicle's original upper mounts (not included in our product kit).
Note
1. All modifications must be installed by licensed mechanics and in compliance with your local modification regulations.
2. Please ensure all components are tightened with correct torque specifications (which can be found in the vehicle service manual) before and after installation. Any loose nuts, bolts, or locks will cause noise. Do check and tighten before serious problems happen.
3. Impact wrench is prohibited during the installation, it will loosen or damage the product.
4. Examine the clearance between tires and suspension. (The minimum clearance should be 4mm, otherwise, you need to add wheel spacers. Caution: It is not sufficient with torsion beam trailing arm axles)
5. We suggest regular maintenance for the coil-over, spray with some WD40 every 3-4 months will keep it smooth and clean, which helps to extend the lifetime.
Application
for Audi TT Coupe 8N 1998-2006
for Audi TT Roadster 8N 1999-2006
for Seat Leon 1M1 1999-2006
Engine: 1.8/ 1.8T
(Note: Does not fit Quattro models; Does not fit Vehicles with auto/self leveling suspension)
Note: You will need shortened Sway Bar Link（ For Audi TT, you need shorter drop links）
Specification
Height adjustable: Yes, lowering 0-25mm depending on the vehicle models
Damping : fixed damping
Top mounts: Front and rear OE top mounts required
Spring rate Front: 6 kg/mm (336 lbs/in)
Spring rate Rear: 6 kg/mm (336 lbs/in)
Spring length Front: 140 mm
Spring length Rear: 275 mm
Spring Preload advised: 7-10 mm
Shock type: twin tube
Package included
2 x Front coil-overs
2 x Rear coil-overs
2 x C spanners
Feature
1. 0-25mm(depends on vehicle models) lower height adjustable
2. Dust boot, solid rubber bump stops
3. Weight Saving Aluminum Coamponents And heavy duty Steel Lower Mount Brackets
4. Simple installation, Easy to adjust.
5. Use the vehicle's original upper mounts (not included in our product kit).
Note
1. All modifications must be installed by licensed mechanics and in compliance with your local modification regulations.
2. Please ensure all components are tightened with correct torque specifications (which can be found in the vehicle service manual) before and after installation. Any loose nuts, bolts, or locks will cause noise. Do check and tighten before serious problems happen.
3. Impact wrench is prohibited during the installation, it will loosen or damage the product.
4. Examine the clearance between tires and suspension. (The minimum clearance should be 4mm, otherwise, you need to add wheel spacers. Caution: It is not sufficient with torsion beam trailing arm axles)
5. We suggest regular maintenance for the coil-over, spray with some WD40 every 3-4 months will keep it smooth and clean, which helps to extend the lifetime.