Application
For BMW 3 E36 Saloon 09/1990-12/1998
316i 318i 320i 323i 325i 328i 318is 325is 318tds 325tds 325td M3
For BMW 3 E36 Coupe 09/1991 - 04/1999
318is 316i 320i 323i 323is 325i 328i 328is M3
For BMW 3 E36 Convertible 03/1993-04/1999
318i 320i 323i 325i 328i M3
For BMW 3 E36 Touring/Estate 08/1994-12/1999
316i 318i 320i 323i 328i 318tds 325tds
Specification:
Height adjustable: Yes, lowering 25-75mm depending on the vehicle models
Damping adjustable: 24 levels of rebound damping force
Spring rate Front: 8 kg/mm ​​(448 lbs/in)
Spring rate Rear: 7 kg/mm ​​(392 lbs/in)
Spring length Front: 180 mm
Spring length Rear: 183 mm
Camber adjustable: Available, front only
Front top mounts: pillow ball bearing camber plate
Rear top mounts: pillow ball
Spring Preload advised: 7-10 mm
Shock Type: Twin Tube
Package included
2x Front coilovers
2x Rear coilovers
2x C spanners
1x Allen wrench
Feature
1. Lowered height adjustment from 25-75mm (depends on vehicle models) which allows a lower center of gravity and also adds a more aggressive stance
2.24 levels of adjustable damper -- This allows you the ability to dial perfectly in your coil-overs system. For nice comfortable driving, set damping to full soft. For more spirited driving, set it to 16 clicks. For occasional track days, set it to full stiff.
3. Adjustable pre-load spring tension to reduce the shaking motion to a certain extent
4. Adjustable Camber Plate and Pillow ball top mount for sharpening steering response. (for some models)
5. CNC machined Aluminum top mounts and lockers-- - excellent strength, and save weight
6. Heavy Duty Steel Lower Mounts---Highly Durable & Reliable
7. High tensile spring--- 600,000 times continuously test to ensure its high tensile strength.
8. All inserts come with fitted long rubber boots--- To protect the damper better and be durable.
9. Twin-Tube structure ---provides excellent handling & control characteristics for most driving conditions
10. Corrosion Finish - Anodized Aluminum And Powder Coated Carbon Steel Parts
Note:
1. All modifications must be installed by licensed mechanics and in compliance with your local modification regulations.
2. Please ensure all components are tightened with correct torque specifications (which can be found in the vehicle service manual) before and after installation. Any loose nuts, bolts, or locks will cause noise. Do check and tighten before serious problems happen.
3. Impact wrench is prohibited during the installation, it will loosen or damage the product.
4. Examine the clearance between tires and suspension. (The minimum clearance should be 4mm, otherwise, you need to add wheel spacers. Caution: It is not sufficient with torsion beam trailing arm axles)
5. We suggest regular maintenance for the coil-over, spray with some WD40 every 3-4 months will keep it smooth and clean, which helps to extend the lifetime.