- 🚚Shipped from a European warehouse
- 💶Final price — no customs or import fees within the EU
- ⚡Fast delivery: usually 2–5 business days (depending on the country)
- 🔎Tracking after dispatch
- ↩️14-day returns (EU law)
- 🛡️24-month seller liability
- 💬Support before and after purchase
- ✅ Verified offer — matches the description
- 🧾Clear description and photos
- 🧩Easy variant selection
- 📦Secure packaging
- ⭐Good “for now” choice
Wiring harness for maXpeedingrods Crosshair LED lamps
The touch switch wiring harness is designed for maXpeedingrods Crosshair Series LED auxiliary lamps with DRL in 3.5-inch and 5-inch sizes. The system can operate up to eight Crosshair 5-inch lamps with DRL simultaneously, with a 1 to 8 configuration.
The harness uses ACC power and is equipped with eight 4-pin DT plugs, two relays, and high-current fuses. The wire is 14 AWG and approximately 3.6 meters long.
Technical specifications
- Application: maXpeedingrods Crosshair Series LED auxiliary lamps with DRL
- Supported lamp sizes: 3.5 inches and 5 inches
- Operating voltage: 12–24 V
- Maximum current: 30A + 30A
- Relay: double, 40 A
- Maximum power: 360 W + 360 W at 12 V and 720 W + 720 W at 24 V
- Plug type: 4-pin DT
- Number of plugs: 8
- Switch type: touchscreen
- Wire: 14 AWG
- Beam length: about 3.6 m
- Power supply method: ACC
- Materials: PVC and copper wire
Method of application
The harness is designed to connect compatible off-road lamps via matching DT plugs. In the scenario described, four pairs of 5-inch Crosshair lamps with DRLs can be connected on the roof in a 1-to-8 configuration.
OEM/OE numbers
There is no confirmed OEM/OE number for this product.
Important assembly information
- Installation should be performed by a professional or under the supervision of a professional.
- During installation, the operating voltage range of 12–24 V must be taken into account.
- The current flowing through the beam should not exceed the rated value.
- The source does not include assembly instructions.
Helpful information before purchasing
Before purchasing, please verify that the lamps you are using are compatible with the maXpeedingrods Crosshair series with DRL and have the appropriate 4-pin DT plugs. The harness operates on a 12-24V range, has eight outputs, and is designed to be powered from the ACC circuit.
The most important information
- Supports up to eight maXpeedingrods Crosshair 5 inch lamps with DRL in a 1 to 8 configuration.
- It has eight 4-pin DT plugs, a touch switch and a dual 40A relay.
- The wire is 14 AWG and approximately 3.6 m long.
- The operating voltage range is 12-24 V and power is supplied via ACC.
- The set uses copper wire, PVC, relays and high-current fuses.
Contents of the set
1 x Wiring harness kit with switch. Confirmed additional components not included; installation instructions not included.
Frequently asked questions
How do I check if a part fits?
Check compatibility with maXpeedingrods Crosshair Series lamps with DRL, their DT connector type, the number of outputs needed, and your 12-24V installation. The harness has eight 4-pin DT plugs.
Is the product ready for assembly?
The source describes the product as a pre-assembled harness with a switch, relays, and fuses. Installation should be performed by or under the supervision of a professional; instructions are not included.
Does the offer include a complete set?
The offer includes one wiring harness kit. The source does not confirm the inclusion of LED lights or installation instructions.
Why is it worth buying from Multigenus?
- Ships from European warehouse for selected offers
- Final price within the EU, excluding customs and import surcharges
- 14 days to return in accordance with EU law
- Pre- and post-purchase support
- The product is described in a way that makes it easier to choose the right variant