- 🚚Shipped from a European warehouse
- 💶Final price — no customs or import fees within the EU
- ⚡Fast delivery: usually 2–5 business days (depending on the country)
- 🔎Tracking after dispatch
- ↩️14-day returns (EU law)
- 🛡️24-month seller liability
- 💬Support before and after purchase
- ✅ Verified offer — matches the description
- 🧾Clear description and photos
- 🧩Easy variant selection
- 📦Secure packaging
- ⭐Good “for now” choice
Wiring harness for maXpeedingrods Crosshair RGB lamps
This wiring harness with a touch switch is designed for maXpeedingrods Crosshair series 3.5-inch and 5-inch RGB LED off-road lights. The 1-to-8 configuration allows for simultaneous control of up to eight lights.
This product is ideal for mounting four pairs of 5-inch Crosshair RGB lights on a vehicle's roof. Power is supplied via ACC, and the harness utilizes 14AWG wires, dual relays, and high-current fuses.
Technical data
- Application: maXpeedingrods Crosshair RGB LED lamps 3.5 inches and 5 inches
- Operating voltage: 10–14 V
- Maximum current: 30A + 30A
- Double relay: 60 A
- Maximum power: 360W + 360W at 12V
- Plug type: 3-pin DT
- Number of plugs: 8
- Switch type: touchscreen
- Wire cross-section: 14AWG
- Beam length: about 3.6 m
- Power supply method: ACC
- Wires: copper, PVC insulated
Connection and important notes
The harness is equipped with matching DT plugs. During installation, connect the lamp's DT plug to the corresponding DT plug on the harness. Installation should be performed by a professional or under their supervision.
Please adhere to the operating voltage range of 10-14V and ensure that the current flow does not exceed the rated values. The kit does not include an operating manual.
Product markings
- 3.5/5inch
- 14AWG
Helpful information before purchasing
This harness is designed for maXpeedingrods Crosshair 3.5-inch or 5-inch RGB LED off-road lights. It supports a setup of up to eight lights and features eight 3-pin DT connectors. Before purchasing, it's worth comparing the connector type, number of lights, and voltage and current requirements.
The most important information
- Supports up to eight lamps in a 1 to 8 configuration.
- The operating voltage is 10-14 V.
- The harness has a dual 60A relay, a maximum current of 30A + 30A and a maximum power of 360W + 360W at 12V.
- Eight 3-pin DT plugs are used, with 14AWG wires and a length of approximately 3.6 m.
- Installation should be done professionally or under the supervision of a professional.
Contents of the set
1 × wiring harness with switch. No instructions included.
Frequently asked questions
How do I check if a part fits?
You should check that your lamps are maXpeedingrods Crosshair RGB lamps in 3.5" or 5" sizes, use 3-pin DT plugs, and are within the 10-14V voltage range. It is also worth considering the number of lamps you are connecting and their current draw.
Is the product ready for assembly?
The harness is supplied as an assembled kit with DT plugs, a switch, relays, and fuses. Installation should be performed by a professional or under their supervision. An instruction manual is not included.
Does the offer include a complete set?
The offer includes one wiring harness with a switch. The source does not confirm the inclusion of lamps or other components outside of the harness.
Why is it worth buying from Multigenus?
- Ships from European warehouse for selected offers
- Final price within the EU, excluding customs and import surcharges
- 14 days to return in accordance with EU law
- Pre- and post-purchase support
- The product is described in a way that makes it easier to choose the right variant