- 🚚Shipped from a European warehouse
- 💶Final price — no customs or import fees within the EU
- ⚡Fast delivery: usually 2–3 business days (depending on the country)
- 🔎Tracking after dispatch
- ↩️14-day returns (EU law)
- 🛡️24-month seller liability
- 💬Support before and after purchase
- ✅ Verified offer — matches the description
- 🧾Clear description and photos
- 🧩Easy variant selection
- 📦Secure packaging
- ⭐Good “for now” choice
Electrical harness for Crosshair LED lamps
The touch switch wiring harness is designed for Crosshair Series LED auxiliary lamps with DRL in 3.5-inch and 5-inch sizes. The system can operate up to eight Crosshair 5-inch lamps with DRL simultaneously, with a 1 to 8 configuration.
The harness uses ACC power and is equipped with eight 4-pin DT plugs, two relays, and high-current fuses. The wire is 14 AWG and approximately 3.6 meters long.
Technical specifications
- Application: Crosshair Series LED auxiliary lamps with DRL
- Supported lamp sizes: 3.5 inches and 5 inches
- Operating voltage: 12–24 V
- Maximum current: 30A + 30A
- Relay: double, 40 A
- Maximum power: 360 W + 360 W at 12 V and 720 W + 720 W at 24 V
- Plug type: 4-pin DT
- Number of plugs: 8
- Switch type: touchscreen
- Wire: 14 AWG
- Beam length: about 3.6 m
- Power supply method: ACC
- Materials: PVC and copper wire
How to use
The harness is designed to connect compatible off-road lights via matching DT plugs. In the scenario described, four pairs of 5-inch Crosshair lights with DRLs can be connected on the roof in a 1-to-8 configuration.
OEM/OE numbers
There is no confirmed OEM/OE number for this product.
Important assembly information
- Installation should be performed by a professional or under the supervision of a professional.
- During installation, the operating voltage range of 12–24 V must be taken into account.
- The current flowing through the beam should not exceed the rated value.
- The source does not include assembly instructions.
Helpful information before purchasing
Before purchasing, verify that the lamps you're using are compatible with the Crosshair DRL series and have the appropriate 4-pin DT plugs. The harness operates in a 12-24V range, has eight outputs, and is designed to be powered from the ACC circuit.
The most important information
- Supports up to eight 5-inch Crosshair lamps with DRL in a 1 to 8 configuration.
- It has eight 4-pin DT plugs, a touch switch and a dual 40A relay.
- The wire is 14 AWG and approximately 3.6 m long.
- The operating voltage range is 12-24 V and power is supplied via ACC.
- The set uses copper wire, PVC, relays and high-current fuses.
Contents of the set
1 x Wiring harness kit with switch. Confirmed additional components not included; installation instructions not included.
Frequently asked questions
How do I check if a part fits?
Check compatibility with Crosshair Series DRL lamps, their DT connector type, the number of outputs needed, and your 12-24V installation. The harness has eight 4-pin DT plugs.
Is the product ready for assembly?
The source describes the product as a pre-assembled harness with a switch, relays, and fuses. Installation should be performed by or under the supervision of a professional; instructions are not included.
Does the offer include a complete set?
The offer includes one wiring harness kit. The source does not confirm the inclusion of LED lights or installation instructions.
Local order fulfillment
Regional fulfillment for more efficient delivery
Selected products may ship from our suppliers’ warehouses in Europe. Availability depends on the product and delivery country.
Supplier warehouses in Europe
including Germany · Netherlands · Poland
France · Spain · Italy
International delivery
26 markets served.
Shipping availability depends on the destination country and product.