{"product_id":"zestaw-podnoszacy-zawieszenie-jeep-cherokee-xj-3-przod-2-tyl","title":"Jeep Cherokee XJ suspension lift kit 3″ front\/2″ rear","description":"\u003ch2\u003eSuspension lift kit for Jeep Cherokee XJ\u003c\/h2\u003e  \u003cp\u003eThis lift kit is designed for 1984–2001 Jeep Cherokee XJ 2WD and 4WD models. It raises the suspension by 3 inches in the front and 2 inches in the rear. The kit components are installed at the front suspension, rear leaf spring hangers, and transfer case lowering.\u003c\/p\u003e  \u003cp\u003eThe kit includes rear hanger brackets, front lift pads, transfer case lowering spacers, and mounting bolts. The source lists the material as steel; the front pads are also described as thermoplastic.\u003c\/p\u003e  \u003ch2\u003eApplication\u003c\/h2\u003e  \u003cul\u003e  \u003cli\u003e  \u003cstrong\u003eMake and model:\u003c\/strong\u003e Jeep Cherokee XJ\u003c\/li\u003e  \u003cli\u003e  \u003cstrong\u003eYear:\u003c\/strong\u003e 1984–2001\u003c\/li\u003e  \u003cli\u003e  \u003cstrong\u003eDrive:\u003c\/strong\u003e 2WD\/4WD\u003c\/li\u003e  \u003cli\u003e  \u003cstrong\u003eLift height:\u003c\/strong\u003e 3 inches front, 2 inches rear\u003c\/li\u003e  \u003cli\u003e  \u003cstrong\u003eInstallation location:\u003c\/strong\u003e left and right side, front and rear of the vehicle\u003c\/li\u003e  \u003c\/ul\u003e  \u003ch2\u003eTechnical data\u003c\/h2\u003e  \u003cul\u003e  \u003cli\u003e2 rear spring hanger brackets\u003c\/li\u003e  \u003cli\u003e2 front lifting pads\u003c\/li\u003e  \u003cli\u003e4 spacers to lower the transfer case\u003c\/li\u003e  \u003cli\u003e4 x M14 × 2 × 110 hexagon head screws\u003c\/li\u003e  \u003cli\u003e4 hexagon head screws M10 × 1.5 × 40\u003c\/li\u003e  \u003c\/ul\u003e  \u003cp\u003eLowering the transfer case helps maintain proper driveshaft alignment after adjusting the ride height. After modifying the vehicle's ride height, it's recommended to inspect and adjust the suspension geometry.\u003c\/p\u003e  \u003cp\u003eThe source indicates that tires up to 2 inches larger than the factory size and tires up to 30 inches can be used. Final tire size selection should be verified for the specific vehicle and suspension configuration. The ratio of component thickness to the resulting lift height is not 1:1 due to the suspension geometry.\u003c\/p\u003e  \u003ch2\u003eOEM\/OE numbers\u003c\/h2\u003e  \u003cp\u003eThere are no confirmed OEM\/OE numbers listed for this product.\u003c\/p\u003e  \u003c!-- mg-product-seo-v4 --\u003e  \u003cdiv class=\"mg-product-seo-v4\" data-mg-stage=\"product-seo-v4-final-append-only\"\u003e  \u003chr\u003e  \u003ch2\u003eHelpful information before purchasing\u003c\/h2\u003e  \u003cp\u003eBefore purchasing, please confirm that your Jeep Cherokee XJ is from a 1984–2001 model year and is equipped with 2WD or 4WD. This kit is designed to raise the front suspension by 3 inches and the rear by 2 inches. Changing the vehicle's ride height may require a suspension geometry check and drivetrain alignment verification.\u003c\/p\u003e  \u003ch2\u003eThe most important information\u003c\/h2\u003e  \u003cul\u003e  \u003cli\u003eApplication: Jeep Cherokee XJ 1984–2001, 2WD\/4WD.\u003c\/li\u003e  \u003cli\u003eLift height: 3 inches front and 2 inches rear.\u003c\/li\u003e  \u003cli\u003eThe kit includes spacers to lower the transfer case.\u003c\/li\u003e  \u003cli\u003eThe ratio of element thickness to lifting height is not 1:1 due to the suspension geometry.\u003c\/li\u003e  \u003cli\u003eAfter installation, it is recommended to check and adjust the suspension geometry.\u003c\/li\u003e  \u003c\/ul\u003e  \u003ch2\u003eContents of the set\u003c\/h2\u003e  \u003cp\u003e2 rear hanger brackets, 2 front lifting pads, 4 transfer case lowering spacers, 4 M14 × 2 × 110 bolts and 4 M10 × 1.5 × 40 bolts.\u003c\/p\u003e  \u003ch2\u003eFrequently asked questions\u003c\/h2\u003e  \u003ch3\u003eHow do I check if a part fits?\u003c\/h3\u003e  \u003cp\u003eCompare the XJ model, generation, 1984–2001 model year, and 2WD or 4WD drivetrain version with the product description. If you have additional suspension or drivetrain modifications, please verify compatibility of your entire configuration.\u003c\/p\u003e  \u003ch3\u003eIs the product ready for assembly?\u003c\/h3\u003e  \u003cp\u003eThe offer includes the components listed in the kit. Installation should be performed according to vehicle specifications; the source recommends professional installation. After adjusting the height, a suspension geometry check is recommended.\u003c\/p\u003e  \u003ch3\u003eDoes the offer include a complete set?\u003c\/h3\u003e  \u003cp\u003eThe offer includes the components indicated by the source: rear hanger brackets, front lift pads, transfer case spacers and bolts in the two sizes provided.\u003c\/p\u003e  \u003ch2\u003eWhy is it worth buying from Multigenus?\u003c\/h2\u003e  \u003cul\u003e  \u003cli\u003eShips from European warehouse for selected offers\u003c\/li\u003e  \u003cli\u003eFinal price within the EU, excluding customs and import surcharges\u003c\/li\u003e  \u003cli\u003e14 days to return in accordance with EU law\u003c\/li\u003e  \u003cli\u003ePre- and post-purchase support\u003c\/li\u003e  \u003cli\u003eThe product is described in a way that makes it easier to choose the right variant\u003c\/li\u003e  \u003c\/ul\u003e  \u003c\/div\u003e  \u003c!-- \/mg-product-seo-v4 --\u003e","brand":"MXR","offers":[{"title":"Default Title","offer_id":58717723328857,"sku":"200007763:201336342","price":839.0,"currency_code":"PLN","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0759\/9125\/3337\/files\/zestaw-podnoszacy-zawieszenie-jeep-cherokee-xj-3-przod-2-tyl-319.webp?v=1787719686","url":"https:\/\/multigenus.com\/en\/products\/jeep-cherokee-xj-3-front-2-rear-suspension-lifting-kit","provider":"Multigenus","version":"1.0","type":"link"}