{"product_id":"wiazka-elektryczna-z-przelacznikiem-maxpeedingrods-crosshair-rgb-14awg","title":"Electrical harness with switch for maXpeedingrods Crosshair RGB 14AWG lamps","description":"\u003ch2\u003eWiring harness for maXpeedingrods Crosshair RGB lamps\u003c\/h2\u003e  \u003cp\u003eThis wiring harness with a touch switch is designed for maXpeedingrods Crosshair series 3.5-inch and 5-inch RGB LED off-road lights. The 1-to-8 configuration allows for simultaneous control of up to eight lights.\u003c\/p\u003e  \u003cp\u003eThis product is ideal for mounting four pairs of 5-inch Crosshair RGB lights on a vehicle's roof. Power is supplied via ACC, and the harness utilizes 14AWG wires, dual relays, and high-current fuses.\u003c\/p\u003e  \u003ch2\u003eTechnical data\u003c\/h2\u003e  \u003cul\u003e  \u003cli\u003e  \u003cstrong\u003eApplication:\u003c\/strong\u003e maXpeedingrods Crosshair RGB LED lamps 3.5 inches and 5 inches\u003c\/li\u003e  \u003cli\u003e  \u003cstrong\u003eOperating voltage:\u003c\/strong\u003e 10–14 V\u003c\/li\u003e  \u003cli\u003e  \u003cstrong\u003eMaximum current:\u003c\/strong\u003e 30A + 30A\u003c\/li\u003e  \u003cli\u003e  \u003cstrong\u003eDouble relay:\u003c\/strong\u003e 60 A\u003c\/li\u003e  \u003cli\u003e  \u003cstrong\u003eMaximum power:\u003c\/strong\u003e 360W + 360W at 12V\u003c\/li\u003e  \u003cli\u003e  \u003cstrong\u003ePlug type:\u003c\/strong\u003e 3-pin DT\u003c\/li\u003e  \u003cli\u003e  \u003cstrong\u003eNumber of plugs:\u003c\/strong\u003e 8\u003c\/li\u003e  \u003cli\u003e  \u003cstrong\u003eSwitch type:\u003c\/strong\u003e touchscreen\u003c\/li\u003e  \u003cli\u003e  \u003cstrong\u003eWire cross-section:\u003c\/strong\u003e 14AWG\u003c\/li\u003e  \u003cli\u003e  \u003cstrong\u003eBeam length:\u003c\/strong\u003e about 3.6 m\u003c\/li\u003e  \u003cli\u003e  \u003cstrong\u003ePower supply method:\u003c\/strong\u003e ACC\u003c\/li\u003e  \u003cli\u003e  \u003cstrong\u003eWires:\u003c\/strong\u003e copper, PVC insulated\u003c\/li\u003e  \u003c\/ul\u003e  \u003ch2\u003eConnection and important notes\u003c\/h2\u003e  \u003cp\u003eThe harness is equipped with matching DT plugs. During installation, connect the lamp's DT plug to the corresponding DT plug on the harness. Installation should be performed by a professional or under their supervision.\u003c\/p\u003e  \u003cp\u003ePlease adhere to the operating voltage range of 10-14V and ensure that the current flow does not exceed the rated values. The kit does not include an operating manual.\u003c\/p\u003e  \u003ch2\u003eProduct markings\u003c\/h2\u003e  \u003cul\u003e  \u003cli\u003e3.5\/5inch\u003c\/li\u003e  \u003cli\u003e14AWG\u003c\/li\u003e  \u003c\/ul\u003e  \u003c!-- mg-product-seo-v4 --\u003e  \u003cdiv class=\"mg-product-seo-v4\" data-mg-stage=\"product-seo-v4-final-append-only\"\u003e  \u003chr\u003e  \u003ch2\u003eHelpful information before purchasing\u003c\/h2\u003e  \u003cp\u003eThis harness is designed for maXpeedingrods Crosshair 3.5-inch or 5-inch RGB LED off-road lights. It supports a setup of up to eight lights and features eight 3-pin DT connectors. Before purchasing, it's worth comparing the connector type, number of lights, and voltage and current requirements.\u003c\/p\u003e  \u003ch2\u003eThe most important information\u003c\/h2\u003e  \u003cul\u003e  \u003cli\u003eSupports up to eight lamps in a 1 to 8 configuration.\u003c\/li\u003e  \u003cli\u003eThe operating voltage is 10-14 V.\u003c\/li\u003e  \u003cli\u003eThe harness has a dual 60A relay, a maximum current of 30A + 30A and a maximum power of 360W + 360W at 12V.\u003c\/li\u003e  \u003cli\u003eEight 3-pin DT plugs are used, with 14AWG wires and a length of approximately 3.6 m.\u003c\/li\u003e  \u003cli\u003eInstallation should be done professionally or under the supervision of a professional.\u003c\/li\u003e  \u003c\/ul\u003e  \u003ch2\u003eContents of the set\u003c\/h2\u003e  \u003cp\u003e1 × wiring harness with switch. No instructions included.\u003c\/p\u003e  \u003ch2\u003eFrequently asked questions\u003c\/h2\u003e  \u003ch3\u003eHow do I check if a part fits?\u003c\/h3\u003e  \u003cp\u003eYou should check that your lamps are maXpeedingrods Crosshair RGB lamps in 3.5\u0026quot; or 5\u0026quot; sizes, use 3-pin DT plugs, and are within the 10-14V voltage range. It is also worth considering the number of lamps you are connecting and their current draw.\u003c\/p\u003e  \u003ch3\u003eIs the product ready for assembly?\u003c\/h3\u003e  \u003cp\u003eThe harness is supplied as an assembled kit with DT plugs, a switch, relays, and fuses. Installation should be performed by a professional or under their supervision. An instruction manual is not included.\u003c\/p\u003e  \u003ch3\u003eDoes the offer include a complete set?\u003c\/h3\u003e  \u003cp\u003eThe offer includes one wiring harness with a switch. The source does not confirm the inclusion of lamps or other components outside of the harness.\u003c\/p\u003e  \u003ch2\u003eWhy is it worth buying from Multigenus?\u003c\/h2\u003e  \u003cul\u003e  \u003cli\u003eShips from European warehouse for selected offers\u003c\/li\u003e  \u003cli\u003eFinal price within the EU, excluding customs and import surcharges\u003c\/li\u003e  \u003cli\u003e14 days to return in accordance with EU law\u003c\/li\u003e  \u003cli\u003ePre- and post-purchase support\u003c\/li\u003e  \u003cli\u003eThe product is described in a way that makes it easier to choose the right variant\u003c\/li\u003e  \u003c\/ul\u003e  \u003c\/div\u003e  \u003c!-- \/mg-product-seo-v4 --\u003e","brand":"MXR","offers":[{"title":"Default Title","offer_id":58718095245657,"sku":"200007763:201336101","price":709.0,"currency_code":"PLN","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0759\/9125\/3337\/files\/wiazka-elektryczna-z-przelacznikiem-do-lamp-maxpeedingrods-crosshair-881.webp?v=1787763294","url":"https:\/\/multigenus.com\/en\/products\/electrical-harness-with-switch-maxpeedingrods-crosshair-rgb-14awg","provider":"Multigenus","version":"1.0","type":"link"}