{"product_id":"wiazka-elektryczna-z-przelacznikiem-3m-do-lamp-rgb-maxpeedingrods-crosshair","title":"3 m wiring harness with switch for maXpeedingrods Crosshair RGB lamps","description":"\u003ch2\u003eWiring harness with switch for maXpeedingrods Crosshair RGB lamps\u003c\/h2\u003e  \u003cp\u003eThis wiring harness with a touch switch is designed for maXpeedingrods Crosshair series RGB LED auxiliary off-road lights. It allows simultaneous control of two lights from this series, in sizes 7.5 inches and 3.5 inches.\u003c\/p\u003e  \u003cp\u003eThe cable is approximately 3m long and uses 14AWG wire. The harness is ACC powered and has an operating voltage range of 10-14V. The maximum current is 30A, and the relay used is rated at 40A. The maximum power specified by the manufacturer is 360W at 12V.\u003c\/p\u003e  \u003ch3\u003eTechnical specifications\u003c\/h3\u003e  \u003cul\u003e  \u003cli\u003e  \u003cstrong\u003eApplication:\u003c\/strong\u003e maXpeedingrods Crosshair RGB LED off-road auxiliary lights\u003c\/li\u003e  \u003cli\u003e  \u003cstrong\u003eSwitch type:\u003c\/strong\u003e touchscreen\u003c\/li\u003e  \u003cli\u003e  \u003cstrong\u003eOperating voltage:\u003c\/strong\u003e 10–14 V\u003c\/li\u003e  \u003cli\u003e  \u003cstrong\u003eMaximum current:\u003c\/strong\u003e 30 A\u003c\/li\u003e  \u003cli\u003e  \u003cstrong\u003eRelay:\u003c\/strong\u003e 40 A\u003c\/li\u003e  \u003cli\u003e  \u003cstrong\u003eMaximum power:\u003c\/strong\u003e 360W at 12V\u003c\/li\u003e  \u003cli\u003e  \u003cstrong\u003ePlug type:\u003c\/strong\u003e 3-pin DT\u003c\/li\u003e  \u003cli\u003e  \u003cstrong\u003eNumber of plugs:\u003c\/strong\u003e 2\u003c\/li\u003e  \u003cli\u003e  \u003cstrong\u003eWire:\u003c\/strong\u003e 14 AWG, approximately 3 m\u003c\/li\u003e  \u003cli\u003e  \u003cstrong\u003ePower supply method:\u003c\/strong\u003e ACC\u003c\/li\u003e  \u003cli\u003e  \u003cstrong\u003eMaterial:\u003c\/strong\u003e PVC and copper wire\u003c\/li\u003e  \u003c\/ul\u003e  \u003ch3\u003eCompatibility and installation\u003c\/h3\u003e  \u003cp\u003eThis harness is designed for use with maXpeedingrods Crosshair Series RGB lamps. Connection is via a matching DT plug. Installation should be performed by a professional or under their supervision. During installation, the operating voltage range must be considered and the maximum current rating of 30A must not be exceeded.\u003c\/p\u003e  \u003ch3\u003eOEM\/OE numbers\u003c\/h3\u003e  \u003cp\u003eNo confirmed OEM\/OE number.\u003c\/p\u003e  \u003ch3\u003eImportant information\u003c\/h3\u003e  \u003cp\u003eAssembly instructions are not included with the product.\u003c\/p\u003e  \u003c!-- mg-product-seo-v4 --\u003e  \u003cdiv class=\"mg-product-seo-v4\" data-mg-stage=\"product-seo-v4-final-append-only\"\u003e  \u003chr\u003e  \u003ch2\u003eHelpful information before purchasing\u003c\/h2\u003e  \u003cp\u003eBefore purchasing, please verify that the lamps you are using are from the maXpeedingrods Crosshair RGB series and have a compatible 3-pin DT connector. The harness is designed for ACC-powered systems and systems operating in the 10-14V range.\u003c\/p\u003e  \u003ch2\u003eThe most important information\u003c\/h2\u003e  \u003cul\u003e  \u003cli\u003eThe beam supports 2 RGB lamps from the maXpeedingrods Crosshair series simultaneously.\u003c\/li\u003e  \u003cli\u003eIt is approximately 3m long and has 14AWG wire.\u003c\/li\u003e  \u003cli\u003eThe maximum current is 30 A and the relay used has parameters of 40 A.\u003c\/li\u003e  \u003cli\u003eThe harness has 2 3-pin DT plugs and a touch switch.\u003c\/li\u003e  \u003cli\u003eThe maximum power specified for the system is 360 W at 12 V.\u003c\/li\u003e  \u003c\/ul\u003e  \u003ch2\u003eContents of the set\u003c\/h2\u003e  \u003cp\u003e1 x Wiring Harness Kit with Switch. Please verify the exact scope of the kit before purchasing; installation instructions are not included.\u003c\/p\u003e  \u003ch2\u003eFrequently asked questions\u003c\/h2\u003e  \u003ch3\u003eHow do I check if a part fits?\u003c\/h3\u003e  \u003cp\u003eCheck compatibility with maXpeedingrods Crosshair Series RGB lamps, the presence of a matching 3-pin DT connector, and installation requirements: 10-14V, ACC power supply and a maximum current of 30A.\u003c\/p\u003e  \u003ch3\u003eIs the product ready for assembly?\u003c\/h3\u003e  \u003cp\u003eThe harness has matching DT connectors for connecting the appropriate lamps, but installation should be performed by a professional or under their supervision. Instructions are not included.\u003c\/p\u003e  \u003ch3\u003eDoes the offer include a complete set?\u003c\/h3\u003e  \u003cp\u003eProduct source confirms 1 set of wiring harness with switch. RGB lamps are not listed as part of the package.\u003c\/p\u003e  \u003ch2\u003eWhy is it worth buying from Multigenus?\u003c\/h2\u003e  \u003cul\u003e  \u003cli\u003eShips from European warehouse for selected offers\u003c\/li\u003e  \u003cli\u003eFinal price within the EU, excluding customs and import surcharges\u003c\/li\u003e  \u003cli\u003e14 days to return in accordance with EU law\u003c\/li\u003e  \u003cli\u003ePre- and post-purchase support\u003c\/li\u003e  \u003cli\u003eThe product is described in a way that makes it easier to choose the right variant\u003c\/li\u003e  \u003c\/ul\u003e  \u003c\/div\u003e  \u003c!-- \/mg-product-seo-v4 --\u003e","brand":"MXR","offers":[{"title":"Default Title","offer_id":58718094426457,"sku":"200007763:201336101","price":389.0,"currency_code":"PLN","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0759\/9125\/3337\/files\/wiring-harness-switch-for-maxpeedingrods-crosshair-rgb-led-lights-12v-118.webp?v=1786745071","url":"https:\/\/multigenus.com\/en\/products\/electrical-harness-with-switch-3m-for-rgb-lamps-maxpeedingrods-crosshair","provider":"Multigenus","version":"1.0","type":"link"}